Manifold

	Model A Ford - Mike's "A" Ford-able Parts - Intake Manifold, Drilled - 1928 - 1931 Code:A9425D Price: $85.00 Model Year: March 1929 - End UOM: Each Quantity in Basket: none
"This excellent quality manifold can be used on all A's. Drilled and tapped, has the plug.
	Model A Ford - Mike's "A" Ford-able Parts - Intake To Exhaust Bolts Code:A9425MB Price: $1.00 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
2 x 5/16 inch - 18 x 3/4 inch Bolt & l.w. to attach the intake to the exhaust manifold.
	Model A Ford - Mike's "A" Ford-able Parts - Exhaust Manifold Code:A9430 Price: $91.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Replace leaking or warped manifold with this good one. Torque to 55/55 lbs.
	Model A Ford - Mike's "A" Ford-able Parts - Cast Iron Header Code:A9430H Price: $325.00 UOM: Each Quantity in Basket: none
This header is designed to be used with the weber down draft carburetor (A9510DOW) - it gave our speedster an extra 10 m.p.h.
	Model A Ford - Mike's "A" Ford-able Parts - Engine Paint - Spray Code:M200 Price: $7.50 Model Year: 1928 - 1931 UOM: CAN Quantity in Basket: none
Need one spray can of this model A Ford green paint if you are touching up your engine. Two cans are needed if you are repainting. 11 Oz. Can. Sorry cannot be shipped by Air or by US Mail.
	Heat Resistant Spray Paint - Black Code:A5240 Price: $9.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Resists up to 1500 degrees for manifolds and mufflers - Spray on clean metal, no primer needed. Black. 11 Oz. Can. Sorry cannot be shipped by Air or by US Mail.
	Heat Resistant Spray Paint - Aluminum Code:A5241 Price: $9.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Resists up to 1200 degrees for manifolds and mufflers - Spray on clean metal, no primer needed. Hi-Heat Aluminum. 12 Oz. Can. Sorry cannot be shipped by Air or by US Mail.
	Model A Ford - Mike's "A" Ford-able Parts - Manifold Nuts Code:A9430N Price: $3.25 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
4 x 7/16 -20 Brass nuts to attach the manifold. Torque to 50ft/lbs.
	Model A Ford - Mike's "A" Ford-able Parts - Manifold Studs Code:A9431 Price: $3.25 Model Year: 1928 - 1934 UOM: Set Quantity in Basket: none
Set of 4 studs to screw into block to attach the manifold.
	Model A Ford - Mike's "A" Ford-able Parts - Manifold Stud Washers Code:A9443 Price: $4.25 Model Year: 1928 - 1934 UOM: Set Quantity in Basket: none
Extra heavy duty washers help hold intake and exhaust manifolds in place. The crown of the washer goes away from the motor.
	Model A Ford - Mike's "A" Ford-able Parts - Gland Rings Code:A9440 Price: $2.95 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
Fit into the manifold to form a tight seal. Use if using regular gaskets. For NEW Exhaust only.
	Model A Ford - Mike's "A" Ford-able Parts - Manifold Gasket Code:A9433F Price: $4.70 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
One-piece asbestos substitute with steel covering gasket.
	Model A Ford - Mike's "A" Ford-able Parts - Manifold Gasket - 2 Piece Code:A9433 Price: $2.50 Model Year: 1928 - 1934 UOM: Pair Quantity in Basket: none
Two-piece flat asbestos substitute gasket
	Model A Ford - Mike's "A" Ford-able Parts - Copper Manifold Gaskets - Jan. '29 - May '31 Code:A9433C Price: $9.50 Model Year: January 1929 - May 1931 UOM: Pair Quantity in Basket: none
For the show car. 2-piece gaskets are copper with asbestos substitute in the middle.
	Model A Ford - Mike's "A" Ford-able Parts - Copper Manifold Gaskets - May 31 till end Code:A9433C2 Price: $11.30 Model Year: May 1931 - End UOM: Pair Quantity in Basket: none
For the show car. 2-piece gaskets are copper with asbestos substitute in the middle. Late '31.
	Model A Ford - Mike's "A" Ford-able Parts - Carb Gasket, Paper Code:A9447 Price: $0.20 Model Year: 1928 - 1934 UOM: Each Quantity in Basket: none
Fits between carburetor and intake manifold.
	Model A Ford - Mike's "A" Ford-able Parts - Carb Gasket, Copper Code:A9447C Price: $2.75 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Fits between carburetor and intake manifold.
	Model A Ford - Mike's "A" Ford-able Parts - Manifold Heater Code:A18478S Price: $72.50 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
"Takes the chill off of a morning. Bolts onto the manifold, with no cutting or welding, has a firewall valve to control heat. The valve A18479S is included. THIS WILL NOT FIT A WAFFLE STYLE EXHAUST MANIFOLD." "Mikes A Ford-able Parts Model A Ford Manifold Heater Installation Instructions"
	Model A Ford - Mike's "A" Ford-able Parts - Manifold Heater Valve Door Code:A18479S Price: $13.95 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
Replacement firewall valve only. Mounts directly on firewall to let you control the heat. Needs a 2 inch hole cut into the firewall. This is included with A18478S.
	Model A Ford - Mike's "A" Ford-able Parts - Heater Door Patch Panel Code:A18478P Price: $12.95 Model Year: 1930 - May 1931 UOM: Each Quantity in Basket: none
"Made in the USA. a 4 1/2"" x 8"" patch panel to fill the area where the heater hole was usually cut. Original gauge steel, with the exact contour reinforced ribs. "
	Model A Ford - Mike's "A" Ford-able Parts - Heater - 6 Volt Code:A18480-6 Price: $215.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Do You get cold when you drive your car in the winter? Now there is a solution to keep you warm, so you can drive year round. This universal aftermarket heater, uses the coolant system for its heat. Instructions included. You will need the Heater Hook Up Kit - A8274 for installation. Also see A8275ACC."
	Model A Ford - Mike's "A" Ford-able Parts - Heater - 12 Volt Code:A18480-12 Price: $146.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Do You get cold when you drive your car in the winter? Now there is a solution to keep you warm, so you can drive year round. This universal aftermarket heater, uses the coolant system for its heat. Instructions included. You will need the Heater Hook Up Kit - A8274 for installation. Also see A8275ACC."
	Model A Ford - Mike's "A" Ford-able Parts - Heater Hose & Fittings Set Code:A18480K Price: $53.75 Model Year: 1929 - 1931 UOM: Set Quantity in Basket: none
When installing the A18480-6 or 12 heater, you will need to install this kit. Kit includes 8' of 3/4" ID hose, an elbow shut off valve that has a 3/8" pipe thread on one side, and a 3/4" hose barb on the other, a 3/8" to 1/2" OD pipe adapter and 4 hose clamps. See A8274 for Heater Hook-up Kit.
	Model A Ford - Mike's "A" Ford-able Parts - Heater Hook-Up Kit Code:A8274 Price: $51.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. Make your life a little simpler with the easy installation of a hot water heater in your Model "A". Replace your lower water pipe with the long pipe. Has a nipple for the original petcock as well as a nipple for the return hose with the fitting. The shorter pipe splices into your upper radiator hose and has a nipple for the temperature gauge as well as the water pickup connection. Pipes are all powder coated black and include clamps for the upper pipe. Upper fitting has a special scooped inlet to force water into the heater.
	Model A Ford - Mike's "A" Ford-able Parts - Water Inlet Code:A8275ACC Price: $59.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. Use this cast aluminum with an extra boss for heater hookup. Comes with plug and bolt for wire clip. Use this Inlet with the 6 or 12 Volt Heater (A18480-6 or A18480-12) and the Heater Hook up Kit (A8274).