Tools

	Model A Ford - Mike's "A" Ford-able Parts - Tool Box - 28-29 Code:T1000 Price: $165.00 Model Year: 1928 - 1929 UOM: Each Quantity in Basket: none
A Mike's Exclusive!! A hand made locking tool box which fits between the frame horns on the front of your Model A. Due to the aero-dynamic design of the tool box, it not only looks beautiful, but also assists with the cooling on your Model A. Powder Coated Black. Shown on our Boat Tail Speedster. "Mike's A Ford-able Parts Model A Ford 1928-1929 Tool Box Installation Instructions"
	Model A Ford - Mike's "A" Ford-able Parts - Tool Box - 30-31 Code:T1005 Price: $165.00 Model Year: 1930 - 1931 UOM: Each Quantity in Basket: none
A Mike's Exclusive!! A hand made locking tool box which fits between the frame horns on the front of your Model A. Due to the aero-dynamic design of the tool box, it not only looks beautiful, but also assists with the cooling on your Model A. Powder Coated Black. Shown on our new Boat Tail Speedster. "Mike's A Ford-able Parts Model A Ford 1930-1931 Tool Box Installation Instructions"
	Mike's Money Saver - Mike's Useful Tools Kit Code:T1010 Price: $109.95 Model Year: 1928 - 1931 UOM: 11 Piece Set Quantity in Basket: none
An assortment of tools that you will need for you Model A. Buy the set, give away or trade out with your friends, either way, take advantage of this great kit!!!
	Wire Wheel Spoke Straightener Code:T1018 Price: $51.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
This is an exact copy of the original spoke straightener. Very useful tool to get those bent spokes back into position.
	Hub Stud Bolt Swage Tool Code:T1109T Price: $9.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
A 20-30 Ton Hydraulic Press must be used with this tool to install hub bolts. This is known as swaging.
	Model A Ford - Mike's "A" Ford-able Parts - Rear Hub Puller Code:T1114T Price: $210.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
No more hard pulling. This pulls the rear hubs free from the axle. An exact copy of the K.R. Wilson Tool. "Mike's A Ford-able Parts - Model A Ford Rear Hub Puller"
	Hub Cap Tool Code:T1130 Price: $57.50 Model Year: 1930 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. Thanks to the unique design of this tool, the hub cap is easily and firmly secured to the wheel, virtually eliminating distracting rattles and lost hub caps caused by poor installation. Not for use on original Hub Caps.
	Model A Ford - Mike's "A" Ford-able Parts - Rear Hub Puller - 1928 Protruding Ring Style Code:T4239A Price: $33.00 Model Year: 1928 UOM: Each Quantity in Basket: none
Made in the USA. An economy style hub puller to do the job for you. Made from strong ductile iron.
	Rear Hub Puller - '29 - '32 Recessed Ring Style - Model A Ford - Mike's "A" Ford-able Parts Code:T4239B Price: $33.00 Model Year: 1929 - 1932 UOM: Each Quantity in Basket: none
Made in the USA. An economy style hub puller to do the job for you. Made from strong ductile iron.
	Model A Ford - Mike's "A" Ford-able Parts - Track Rivet Tool Code:T2013T Price: $1.70 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Made in the USA. Use this tool to keep from damaging the heads on the A2013 rivets, by placing them in the center, and using it as a bucking bar when peening."
	Model A Ford - Mike's - Brake Riveting Tool Set Code:T2018 Price: $19.95 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
This is an invaluable tool for the DIYer. It comes complete with a punch to remove old rivets, a tool to drill and countersink lining, and a tool to install new rivets. "Model A Ford Brake Riveting Tool Diagram"
	Model A Ford - Mike's "A" Ford-able Parts - Replacement Riveting Tools for the T2018 Code:T2019 Price: $9.95 Model Year: 1928 - 1931 UOM: Set 4 Quantity in Basket: none
Hardened heat treated replacement tools for the T2018.
	Model A Ford - Mike's "A" Ford-able Parts - Brake Adjusting Tool Code:T2012 Price: $39.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
A very handy tool to adjust your brakes by pushing the brake pedal down to a specific distance so you can adjust each wheel. The brakes are adjusted at the wheels in relation to how far the brake pedal is depressed. The top of the tool hooks around the steering wheel.
	Model A Ford - Mike's "A" Ford-able Parts - Front & Rear Brake Shoe Centering Tool Code:T2021T Price: $44.00 Model Year: 1928 - 1929 UOM: Each Quantity in Basket: none
Mount this tool on the front spindle or rear axle secured by the axle nut. Set the adjustable finger on the tool just off the brake lining. Rotate the tool around the circumference of the brake shoes. The finger must be the same distance off the shoes all the way around. If not, the shoes will not completely contact the drum. If say the top half of the shoes to finger gap is larger than the bottom, then use a crescent wrench to make the adjustment. Slide the wrench over the roller track ear and bend both ears down. Reverse the bend if the gap is in the bottom half.
	Model A Ford - Mike's "A" Ford-able Parts - Brake Shoe Installation Tool Code:T2020 Price: $19.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
The safe and easy method for removing and installing Model A Brake Shoes. Use the leverage created by the long pull handle to safely stretch the springs allowing for easy removal and installation of the shoes.
	Model A Ford - Mike's - Brake Adjustment Wedge Tool Code:T2041T Price: $8.25 Model Year: 1928 - 1934 UOM: Each Quantity in Basket: none
Used on the wedge when adjusting your brakes.
	Model A Ford - Mike's "A" Ford-able Parts - Front Brake Lever Shaft Bushing Reamer Code:T2082R Price: $117.50 Model Year: 1928 - 1936 UOM: Each Quantity in Basket: none
"13"" Long fluted .559 reamer to reach both bushings."
	Model A Ford - Mike's "A" Ford-able Parts - Rear Brake Camshaft and Emergency Toggle Lever Reamer Code:T2227R Price: $78.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Made in the USA. A quality spiral hand reamer, reams the rear brake camshaft bushings (A2227). This is a fluted reamer - 5"" long to reach both bushings in one operation. Ream to .688."
	Model A Ford - Mike's "A" Ford-able Parts - Rear Brake Camshaft Bushing Reamer Code:T2227AR Price: $39.95 Model Year: 1928 - 1934 UOM: Each Quantity in Basket: none
An adjustable Reamer for the Rear Brake Camshaft Bushings (A2227) and also the Emergency Toggle Lever Bushings. Reams to .688.
	Model A Ford - Mike's "A" Ford-able Parts - Brake Buddy Code:T2499 Price: $19.95 UOM: Each Quantity in Basket: none
Made in the USA. A great new tool to keep under your seat for adjusting your brakes in a hurry. Complete instructions included. "Mike's "A" Ford-able Parts - Model A Ford Brake Buddy Tool Instructions Page 1" "Mike's "A" Ford-able Parts - Model A Ford Brake Buddy Tool Instructions Page 2"
	Front Spindle Bolt Bushing Reamer - Model A Ford - Mike's "A" Ford-able Parts Code:T3112R Price: $139.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"19"" Long to ream both bushings in line. Reams to .814""."
	Model A Ford - Mike's "A" Ford-able Parts - Front Spindle Bolt Bushing Reamer Code:T3112TR Price: $39.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
An imported version.
	Tie Rod/Drag Link End Plug Tool Code:T3305T Price: $5.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"You can remove the threaded end plugs on the tie rod and drag link ends with this tool. Use 7/8"" wrench."
	Steering Wheel Puller Code:T3600P Price: $29.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Helps remove the steering wheel from the shaft. Contains 2 Pulling plates. One for the '28 - '29 steering wheel and the other for the '30-'31 steering wheel.
	Light Switch Spider Tool - Model A Ford - Mike's "A" Ford-able Parts Code:T3643 Price: $6.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Tape the horn button down with a piece of masking tape or have someone hold the button down for you. Now insert the light switch spider over the legs of the tool, slide the spring onto the spider and push them both onto the horn rod making sure you have the ears lined up correctly. Push far enough so you can install the retainer, then remove the tool and you have just installed the spider and retainer easily. The spring A3642 and Spider A3643 are sold separately. "Mikes A Fordable Parts-Model A Ford Light Switch Spider Tool Instructions"
	Model A Ford - Mike's - Universal Bushing Installation & Removal Tool - T3820/44 Code:T382044T Price: $8.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"An ideal tool to remove bushings from rear brake camshaft, rear & front spring and perch bushings."
	Pinion Puller Code:T4210T Price: $38.50 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
Don't risk damaging your drive shaft threads.
	Knock-Off Wheel Puller Code:T4235WP Price: $3.75 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"To free hub from axle, remove axle nut, screw on Puller, jack up opposite wheel, and hit to release. This may not release very rusted or tight hubs - use T1114T for this."
	Economy Seal Driver Code:T4246 Price: $9.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Inexpensive tool to install axle seals. Inside is threaded to screw your own pipe on.
	Pinion Nut Wrench Code:T4634T Price: $13.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
High quality steel wrench with good design to install or remove the pinion nut.
	Model A Ford - Mike's "A" Ford-able Parts - Traveling Spring Spreader - Rear Code:T5300 Price: $34.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Compact spreader is for rear leaf spring. Set one end against the rolled end of spring - other on the opposite housing bolt, and start spreading. Make sure to grease the threads!!!
	Model A Ford - Mike's "A" Ford-able Parts - Front Spring Spreader Code:T5301 Price: $52.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Safely spread the front leaf spring to remove the spring or to replace the shackles. Make sure to grease the threads!!!
	Front Spring Spreader - Model A Ford - Mike's "A" Ford-able Parts Code:T5301MOD Price: $96.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
No Model A Shop would be without this tool? There is no tool on the market today to compare with this one.
	Model A Ford - Mike's "A" Ford-able Parts - Rear Spring Spreader Code:T5302 Price: $79.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
The best on the Martket!! Mike's Exclusive. Made in the USA for Mike's. This heavy duty spring spreader, has long legs, end pads are notched to fit the rolled end of the spring. No slipping, comes with 1 1/2"" wrench for turning nuts. Yes, we are aware that there are others on the market - we feel that ours are a superior product. They are a heavy duty design for safety. Make sure to grease the threads!!!
	Rear Spring Spreader Code:T5302MOD Price: $135.00 Model Year: 1928 -1931 UOM: Each Quantity in Basket: none
No Model A shop should be without this tool! This is a 1 piece design - no legs to fit - adjusting rod supplied. There is no tool on the market today to coompare with this one.
	Shackle Bushing Reamer Code:T5303TR Price: $37.50 UOM: Each Quantity in Basket: none
Adjustable Reamer. An inexpensive import that will get the job done.
	Shackle Bushing Reamer Code:T5303R Price: $72.00 UOM: Each Quantity in Basket: none
Made in the USA. Hand Reamer for the rear and front shackle bushings.
	Model A Ford - Mike's "A" Ford-able Parts - Shackle and Front Perch Bushing Drill Bit Code:T5303D Price: $23.95 Model Year: 1909 - 1931 UOM: Each Quantity in Basket: none
"Drill your shackle bushings to the proper bore. An alternative to an expensive reamer. 14.5mm bit with 1/2"" shank. Bushings included with shackle kits do not need to be reamed."
	Model A Ford - Mike's "A" Ford-able Parts - Frame Spreader Code:T5304 Price: $105.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
No Model A Shop should be without this Tool. Spread your frame before restoration and save yourself a lot of line-up headaches. "Mike's A Ford-able Parts - Model A Ford Frame Spreader Instructions"
	Cylinder Head Puller and Engine Lifter - Model A Ford - Mike's "A" Ford-able Parts Code:T6010P Price: $95.00 Model Year: 1928-1934 UOM: Set Quantity in Basket: none
This new tool can be used to pull the engine, or just for lifting the head. The puller comes with special hardware.
	Model A Ford - Mike's - Head Nut Torque Tool Code:T6064T Price: $19.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
You no longer have to remove the distributor!! Use this new tool to torque the nut that hides behind the distributor.
	Model A Ford - Mike's "A" Ford-able Parts - Stud Installation and Removal Tool Code:T6065 Price: $39.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Use this tool for installing or removing studs on your cylinder head.
	Drill Guide Tool Code:T6065DG Price: $31.50 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
The purpose of this tool is to act as a drill guide for a 29/64" bit to install a heili coil. There is also a #12 drill guide to center drill on a broken stud.
	Model A Ford - Mike's "A" Ford-able Parts - Stud Thread Repair Kit Code:T6065RK Price: $28.00 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
"Made in the USA. Sooner or later we all have to repair threads in our block. This Heli-Coil Kit has everything you need, except drill bit. Use a 29/64"" tap drill bit."
	Piston Ring Compressor Tool Code:T6149T Price: $12.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
One of these makes installation of rings a breeze.
	Model A Ford - Mike's "A" Ford-able Parts - Camshaft Nut Tool Code:T6251 Price: $22.00 Model Year: 1928 - 1934 UOM: Each Quantity in Basket: none
"Remove or install your cam nut with this special tool. Won't damage nut. Use 1 1/8"" socket with tool."
	Model A Ford - Mike's "A" Ford-able Parts - Timing Kit Code:T6252 Price: $31.50 Model Year: 1928 - 1931 UOM: KIT Quantity in Basket: none
Complete kit with instructions to Set your timing. A timing light is required.
	Timing Wrench Code:T6253 Price: $39.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. This wrench is designed to easily rotate the crankshaft of your Model A to determine top dead center. Comes with complete instructions. WARNING: Make sure to remove the tool before starting your engine. "Model A Ford - Mike's A Ford-able Parts Timing Wrench Instructions"
	Model A Ford - Mike's "A" Ford-able Parts - EZ Timing Pin Setter Code:T6254 Price: $9.50 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
Made in the USA. This tool allows you to time your engine the "EZ" Way. The felt covered base of the tool interfaces against the radiator using a spring to hold the timing pin firmly insdie the timing cover hole. Turn the engine and the spring pushes the timing pin into the hole in the timing gear. So "EZ" !! Timing pin is not included - Order A6023AR or A6023. "Mike's A Fordable Parts - Model A Ford EZ Timing Setter - T6254"
	Model A Ford - Mike's "A" Ford-able Parts - Camshaft Ratchet Nut Wrench Code:T6320 Price: $39.25 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Remove or tighten the nut with out having to remove the radiator - Uses a 1 3/8"" Ratchet."
	Model A Ford - Mike's "A" Ford-able Parts - Flywheel Gauge Code:T6381 Price: $24.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Made in the USA. Use the small bracket in this kit to determine if the flywheel is seated properly on the crankshaft. The large bracket bolts to the flywheel, then turn the flywheel so that you can be sure that the flywheel housing is correctly shimmed against the block. Both of these areas can cause vibrations if not properly done." Mike's A Ford-able Parts Model A Ford Flywheel Gauge Tool Installation Instructions"
	Model A Ford - Mike's - Valve Guide Tool Code:T6511 Price: $14.25 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Best on market. Duplicate of K.R. Wilson tool used for the Model A engine. For original Style Valves only - NOT Modern valves.
	Valve Lapping Tool Code:T6512 Price: $10.20 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Rubber suction cups stick to the valves, which in turn spins the valve, grinding it into the seat."
	Model A Ford - Mike's "A" Ford-able Parts - Valve Spring Compressor Tool Code:T6513T Price: $36.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"This tool makes the job so easy. Place the hook over the manifold stud, and it acts as a pivot to pry the spring up to install the keeper."
	Thread Repair Kit Code:T6731 Price: $16.95 Model Year: 1909 - 1931 UOM: Set Quantity in Basket: none
Made in the USA. Do you have a stripped oil drain plug hole? Use this special adapter which threads into the oil drain and cuts new threads for you. No need to remove the engine from the car. A new smaller drain plug is included with the set.
	Model A Ford - Mike's - Transmission Gear Shift Lever Spring Removal & Installation Tool Code:T7226T Price: $24.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
For the removal or installation of your gear shift lever spring.
	Model A Ford - Mike's "A" Ford-able Parts - Clutch Disc Alignment Tool Code:T7550T Price: $3.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Made in the USA. This helpful tool aligns the disc with the pilot bearing when you are installing a new clutch disc. Place the correct side of the clutch disc, shortest side of the hub, against the flywheel - install the pressure plate using 12 bolts (A7563MB not included). Do not tighten the bolts. Now, using your align tool, center the clutch disc onto the pressure plate and carry on inserting the tool into the pilot bearing. Then torque down the bolts to the flywheel - then remove the tool. "
	Pedal Bushing Reamer Code:T7508TR Price: $45.00 Model Year: 1928 -1931 UOM: Each Quantity in Basket: none
This reamer will ream both bushings in each pedal or the bushings in the bell housing for the clutch release shaft. Ream to .874.
	Model A Ford - Mike's - Water Pump Wrench Code:T8501W Price: $1.40 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Specially designed for water pump packing nut. Do not over tighten.
	Model A Ford - Mike's "A" Ford-able Parts - Fan Knock Off Tool Code:T8600T Price: $2.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Made in the USA. This innovative tool will help you to remove your fan. Simply thread this special nut onto the end of the shaft, hold the fan and give the tool a couple of good hits to break the fan loose from the shaft."
	Model A Ford - Mike's "A" Ford-able Parts - Gas Tank Filler Screen Tool Code:T9021 Price: $3.75 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
A great tool to help with the installation or removal of the original filler screen (A9020). Place the tool in the filler neck notches and use a socket wrench and extension. This will not work on the reproduction screens available at this time.
	Model A Ford - Mike's "A" Ford-able Parts - Gas Gauge Tool Set Code:T9300 Price: $6.45 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
Safely work on gas gauge with cast aluminum heat treated tool Set. Will not damage nuts.
	Model A Ford - Mike's - Heavy Duty Gas Gauge Tool Set Code:T9300HD Price: $10.00 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
A much heavier duty tool than the T9300. Use the square tool to remove or install the inner nut and the larger laser cut piece is angled to make the removal of the large outer nut easier.
	Model A Ford - Mike's "A" Ford-able Parts - Carburetor Rebuilding Wrench Code:T9511 Price: $12.35 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Copy of KR Wilson tool used to rebuild Zenith Carburetors.
	Model A Ford - Mike's "A" Ford-able Parts - Carburetor Jet Tap Code:T9574 Price: $6.60 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Special tap to clean jets on Zenith carburetor. This is a 5mm 75 Pitch tap.
	Single Carburetor Venturi Puller Code:T9586 Price: $16.95 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
This handy little tool will help you remove the venturi from the carburetor which is always a very hard job to do.
	Model A Ford - Mike's "A" Ford-able Parts - Generator Pulley Adapter Code:T10144R Price: $1.75 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"If you have the earlier long nose generator and cannot find the correct pulley, you can now use the more common short nose pulley with this adapter."
	Modern Bendix Drive Installation Tool - Model A Ford - Mike's "A" Ford-able Parts Code:T11350 Price: $17.50 Model Year: All UOM: Each Quantity in Basket: none
A handy unit to help with the installation of the modern drive. Instructions Included.
	Model A Ford - Mike's "A" Ford-able Parts - Polarity Tester Code:T12116 Price: $30.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. Put this between the distributor cap and the coil wire to insure everything is working properly. Comes with instructions.
	Model A Ford - Mike's "A" Ford-able Parts - Spark Tester Code:T12117 Price: $22.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. Test your ignition voltage by placing this between the distributor cap & the coil wire. This can also help start a flooded engine. Complete instructions. This shows how much voltage the system is generating. "Mike's A Ford-able Parts - Model A Ford Spark Tester Instructions"
	Model A Ford - Mike's "A" Ford-able Parts - Ignition Tester Code:T12118 Price: $10.75 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Made in the USA. Hold this handy tool against the spark plug while the car is running, to see if you are getting spark to the plug."
	Distributor Puller Code:T12130DP Price: $37.95 Model Year: 1928 - 1931 UOM: Kit Quantity in Basket: none
Made in the USA. This will safely remove the distributor from the head without breaking the distributor casting. "Mike's A Ford-able Parts Model A Distributor Puller Tool Instructions"
	Distributor Bushing Reamer Code:T12132R Price: $68.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. A quality made spiral piloting reamer. Aligns both bushings while reaming. Not a cheap import.
	Distributor Reamer Code:T12132TR Price: $36.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"For the distributor or Oil Pump bushings. This is the cheaper import, but will not do both bushings at the same time as the T12132R will."
	Model A Ford - Mike's "A" Ford-able Parts - Distributor Cam Wrench Code:T12210CW Price: $0.90 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Holds the cam in place, so that you can tighten the cam screw after you set the ignition timing."
	Model A Ford - Mike's "A" Ford-able Parts - Distributor Timing Nu-Wrench Code:T12210NU Price: $9.75 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
The tool that Henry should have made. Make timing a piece of cake. Follow the simple directions included with the wrench and have your car timed in 5 minutes. "Mikes A Fordable Parts - Model A Ford Nu-Rex Timing Wrench Installation Instructions"
	Model A Ford - Mike's - Z Distributor Cam Wrench Code:T12210Z Price: $2.40 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
No need to remove the distributor body. Fits directly onto the cam for adjusting.
	Model A Ford - Mike's "A" Ford-able Parts - Cowl Lamp Marking Tool Code:T13300X Price: $4.25 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Takes the guesswork out of deciding where to drill new holes when installing a cowl light.
	Model A Ford - Mike's "A" Ford-able Parts - Spark Plug Hole Tap Code:T12407 Price: $33.95 Model Year: 1928 - 1934 UOM: Each Quantity in Basket: none
Use this tool to tap a hole in the cylinder head where the spark plug threads in.
	Tool Bag Code:T17005 Price: $8.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Nice heavy duty tool bag, keep tools clean and together. Cobra style top material"
	Model A Ford - Mike's "A" Ford-able Parts - Tire Iron - October 1927 - July 1928 Code:T17019A Price: $18.25 Model Year: October 1927 - July 1928 UOM: Each Quantity in Basket: none
"All tire irons are tempered for strength. Blunt on one end. 10"" Long."
	Model A Ford - Mike's "A" Ford-able Parts - Tire Irons - July 1928 - November 1928 Code:T17019B Price: $18.25 Model Year: July 1928 - November 1928 UOM: Each Quantity in Basket: none
"Tire Irons are tempered for strength. Screw Driver Point on one end. 10"" Long."
	Model A Ford - Mike's "A" Ford-able Parts - Tire Iron - December 1928 - End Code:T17019C Price: $17.15 Model Year: December 1928 - End UOM: Each Quantity in Basket: none
"All Tire Irons are tempered for strength. Spoon on one end. 10"" Long."
	Tire Iron - Late 1931 Code:T17019D Price: $29.95 Model Year: Late 1931 UOM: Each Quantity in Basket: none
Twist style, screws driver point on one end. 19 3/4" long.
	Crank Code:T17036 Price: $17.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Dual purpose tool use one end to crank car and the other to change a tire. - NOW STOCKING BEST QUALITY - POWDER COATED.
	Model A Ford - Mike's "A" Ford-able Parts - Engine Lift Code:T17022 Price: $9.75 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Used to remove engines and stock cylinder heads. We recommend using 2 for safety purposes.
	Model A Ford - Mike's - Grease Fitting Tool Code:T353020 Price: $2.65 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
This little tool is helpful when you install the press-in style grease fittings.
	Tire Gauge Stem Tool Code:T18100S Price: $16.30 UOM: Each Quantity in Basket: none
"Made in the USA. This is a brass, chrome plated tool. Has a female thread."
	Grease Gun Adapter Code:T353032 Price: $3.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. This adapter can screw onto a regular gun to enable it to be used to grease the old style grease fittings.
	Snap Fastener Tool Code:T37106T Price: $4.95 UOM: Each Quantity in Basket: none
This useful tool is for fastening the snap style fasteners.
	Top Bow Tool - 1/2". Code:T43501T Price: $38.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. A handy tool to attach the wood bows to the metal top irons. 1/2" Tool is made for standard air hammers and gives the rivet a truss head appearance. Order A43501R for rivets.
	Top Bow Tool Rivets Code:A43501R Price: $0.40 UOM: Each Quantity in Basket: none
The rivets needed for the T43501T Top Bow Tool. Tool sold seperately.
	Model A Ford - Mike's "A" Ford-able Parts - Door Hinge Puller - NOT REFUNDABLE!! Code:T46335HR Price: $29.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
This helpful tool, uses three graduating hardened push pins to push your old hinge pins up and out of the hinge. As you tighten the bolt it will push the dowel and the old pin out. Set comes complete with 3 different length push pins and complete instructions. NOT to be used on Slant Windshield cars. IF YOUR DOWEL PINS START BENDING - DO NOT GO ANY FURTHER WITH THIS TOOL. THESE DOWELS ARE MADE FROM A HARDENED STEEL BUT NOT CASE HARDENED. THE MANUFACTURER HAS ISSUED A WARNING THAT IF A CASE HARDENED OR HEAT TREATED STEEL WAS USED, IT COULD VERY WELL EXPLODE OR SPLINTER UNDER SUCH PRESSURE, AND POSSIBLY DO BODILY HARM. I SUGGEST TRYING PENETRATING OIL, BUT IF THAT DOESN'T WORK, THEN TAKE A FINE DRILL BIT AND TRY DRILLING AT LEAST HALFWAY THROUGH THE PIN. THEN USE THE REMOVING TOOL.
	Drill Out Tool Code:RA1010 Price: $29.05 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Made in the USA. If you are drilling out the old rivets, use the drill out tool that fits over the round head to hold it steady. "
	Waffle Tool Code:RA1011 Price: $32.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Used to peen end of new rivets. Will fit any air hammer.
	Bucking Bar Code:RA1012 Price: $29.05 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Lets you hold round head of new rivets while you peen the other end.
	Manual Rivet Tool - 1/4" Rivets Code:RA1013 Price: $27.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. For Setting solid rivets and giving them a rounded peen. For 1/4" Rivets. Its best to set them hot. PLEASE NOTE: There is an error in the catalog, this is for 1/4" rivets and NOT for 3/8" as printed.
	Manual Rivet Tool - 3/16" Rivets Code:RA1014 Price: $27.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. For Setting solid rivets and giving them a rounded peen. For 3/16" Rivets. Its best to set them hot. PLEASE NOTE: There is an error in the catalog, this is for 3/16" rivets and NOT for 1/4" as printed.
	Air Rivet Tool - 1/4" Rivets Code:RA1015 Price: $27.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. For Setting solid rivets and giving them a rounded peen. Fits standard air hammers. For 1/4" Rivets. PLEASE NOTE: There is an error in the catalog, this is for 1/4" rivets and NOT for 3/8" as printed.
	Air Rivet Tool - 3/16" Rivets Code:RA1016 Price: $27.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. For Setting solid rivets and giving them a rounded peen. Fits standard air hammers. For 3/16" rivetsPLEASE NOTE: There is an error in the catalog, this is for 3/16" rivets and NOT for 1/4" as printed..
	Model A Ford - Mike's "A" Ford-able Parts - Tubular Rivet Tool - 3/16" Code:RA1017 Price: $32.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
This hand held tool will get the job done. Used on door latches, windshield brackets, floorboard irons, shift plate clips, and transmission fork pins.
	Model A Ford - Mike's "A" Ford-able Parts - Tubular Rivet Tool - 1/8" Code:RA1018 Price: $32.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
This tool will be useful for installing the rivets on the crank hole cover & the '30-'31 Cowl Lamp Light Socket.
	Model A Ford - Mike's "A" Ford-able Parts - Rivet Jacks - 5/16" Rivets Code:RA1021 Price: $9.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
An adjustable tool that is used for bucking the heads of rivets in tight areas.
	Model A Ford - Mike's "A" Ford-able Parts - Tubular Rivet Tool - 9/64" Code:RA1019 Price: $29.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Use this tool for installing the brake lining, hood handles, hood bumpers and hood clips.
	Model A Ford - Mike's "A" Ford-able Parts - Rivet Jacks - 1/4" Rivets Code:RA1020 Price: $9.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
An adjustable tool that is used for bucking the heads of rivets in tight areas.
	Model A Ford - Mike's - Hand Held Tubular Rivet Tool Code:RA2022 Price: $8.00 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
This is a hand held tool with a special end that will roll a tubular rivet like a professional. This tool also includes a bucking bar. Has a concave head to fit the rivet head, to support the rivet while you give it a hit on the head.
	Model A Ford - Mike's "A" Ford-able Parts - Side Curtain Fastener Tool Set Code:UF40T Price: $16.95 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
Tool for installing UF40 side curtain fasteners.
	Model A Ford - Mike's "A" Ford-able Parts - Body Sockets Installation Tool Code:T81002T Price: $2.20 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
This is the tool for the body socket A81002EA and A81002.
	Lift the Dot Socket Tool - Open Cars Code:UF16T Price: $76.65 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. This is the tool to install the UF16 - Lift the Dot Sockets with prongs. Punches a hole and 4 slits in the perfect location to mount the sockets.