|
 |
Model A Ford - Mike's "A" Ford-able Parts - Interstate Optima Battery Code:A5150B Price:
$160.00
Quantity in Basket: none
|
| "Excellent quality spiral cell battery, with 750 cca, 104 minute reserve. Sealed unit. Battery is placed on an angle onto the bottom plate and you must use the A5166OP to hold it down. " |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Battery Hold Down Bracket Code:A5166OP Price:
$22.10
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| A high quality powder coated steel bracket that holds the Optima Battery A5150B in place in a standard Model A Battery Frame. |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Ford Script Battery Code:A5150F Price:
$235.00
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "6 Volt, Original design Ford Script Battery. Has Ford on the case, caps and straps. You can have this 120 AMP hour, 6 volt battery charged at your local service station. This unit is shipped dry - you must add the acid. W 7 3/8"" x L 9 1/4"" x H 9""." |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Battery Maintainer Code:A5150M Price:
$64.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "Keep your battery at peek performance. Use this to maintain a good battery at full charge. Not to be confused with a battery charger. A low voltage is sent to the battery until it's fully charged, then cuts off until the battery starts to lose some charge, at which time it will automatically cut back on to bring up the battery. This unit is safe and can be left unattended on the battery for months. Can be used on 6 or 12 Volt batteries. Lamp flashes when battery is fully charged." |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Power Inverter - 7.5 amp Code:A10000CHD Price:
$99.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "Convert 6 volt positive ground to12 volt negative ground to power radios, CB's or other 12 Volt accessories. Works for positive ground systems only. 7.5 AMP." |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Powder Coated Battery Box Support Code:A5151PC Price:
$23.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Powder coated for durability. Well made reproductions complete with support studs A5154 and bottom plate A5151BP. |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Battery Box Bolts and Nuts Code:A5151X Price:
$1.25
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| This is a 9 piece Set to secure the battery box to the frame. |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Battery Box Support Stud Set Code:A5154 Price:
$3.95
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| "Replacement Set of studs, washers, and nuts connect the battery hold down to the frame." |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Battery Box Hold Down Clamps (cast) 1928 Code:A5163A Price:
$8.75
Model Year: 1928
UOM: Pair
Quantity in Basket: none
|
| Original style clamps that hold the 2 corners of the battery to the box. (cast) 1928 - Aug. 1928. |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Battery Box Hold Down Clamps Code:A5163B Price:
$3.95
Model Year: May 1929 - End 1931
UOM: Pair
Quantity in Basket: none
|
| Reproduction of the corner clamps Ford used from May 1929 until end of production. Stamped Steel. |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Battery Box Hold Down Frame Code:A5163FRPC Price:
$7.00
Model Year: 1928 - 1929
UOM: Each
Quantity in Basket: none
|
| Powder Coated for durability. Good Repro. Of the frame Ford used - more secure than A5163A. Used from Aug. '28 - May '29. |
|
|
|
|
|
Model A Ford - Mike's "A" Ford-able Parts - Battery Box Bottom Plate - Square plate w/2 drain holes Code:A5151BPC Price:
$4.95
Model Year: 1931
UOM: Each
Quantity in Basket: none
|
| If your battery frame is still good but the bottom has rusted out, replace if by welding a new plate to the frame. Ford prints called for the first two style plates to be trimmed straight, but not the last style. When the die strikes the plate to make the grove, the metal pulls, causing the sides to draw in 1/8"" in some areas. Die stamped copies, made from Ford prints." |
|
|