Flywheel

	Flywheel To Crankshaft Bolt Code:A6376 Price: $6.95 Model Year: 1928 - 1948 UOM: Set / 4 Quantity in Basket: none
"4 x 7/16"" -20 x 13/16"" Special bolt with hole in head for safety wire lock. Torque to 65 ft. lbs. Use A7609 retainer with these bolts. See A6377 for safety wire."
	Flywheel Housing Block Bolts Code:A6378MB Price: $3.95 Model Year: 1928 - 1931 UOM: Set / 8 Quantity in Basket: none
"4 - 7/16 -14 x 1 1/16"" with safety wire holes fit toward inner housing. 2- 7/16 inch-14 x 1 1/16 with l/w connect the accelerator assembly to top of this housing. Torque to 55 ft. lbs. Order A6377 for safety wire."
	Clutch or Bell Housing To Flywheel Housing Bolts Code:A6380MB Price: $3.75 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
"11 x 3/8"" -16 x 1"" Bolts and Lock Washers to attach the clutch housing to flywheel housing."
	Flywheel Gauge Code:T6381 Price: $36.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Made in the USA. Use the small bracket in this kit to determine if the flywheel is seated properly on the crankshaft. The large bracket bolts to the flywheel, then turn the flywheel so that you can be sure that the flywheel housing is correctly shimmed against the block. Both of these areas can cause vibrations if not properly done."
	Flywheel Ring Gear Code:A6384 Price: $24.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Overhauling your engine? Replace this part. Heat with torch, ring will slip onto flywheel. Tapered teeth face rear of car."
	Flywheel Housing Gasket Code:A6396 Price: $0.75 Model Year: 1928 - 1934 UOM: Each Quantity in Basket: none
Goes between flywheel housing and back of block to seal rear of motor.
	Flywheel Dust Cover Inspection Plate Code:A6398 Price: $9.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Half-moon Inspection Plate that goes at back of oil pan.
	Flywheel Dust Cover Inspection Plate Bolts Code:A6398MB Price: $0.90 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
This set of 3 fine threaded bolts and lock washers hold the half moon plate at the back of the oil pan.
	Flywheel Dowel Code:A6397 Price: $2.95 Model Year: 1928 - 1932 UOM: Pair Quantity in Basket: none
This dowel connects the flywheel to the crankshaft.
	Flywheel Shim Code:A6400 Price: $0.95 Model Year: 1928 - 1931 UOM: Pair Quantity in Basket: none
Fits between flywheel housing and the block. You may need more than 1 set. Brass .010 thick.
	Flywheel Cotter Pin Code:A6397A Price: $0.25 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Use this large cotter pin so that it hangs out of the hole in the bottom of the flywheel. Oil slowly collects in the flywheel housing and drips from the hole. If the hole is clogged by road dirt, the oil can eventually reach the clutch disc, causing the disc to slip. With the cotter pin through the hole, each bump will move the pin and keep the hole clear. These are included in the #37 and #37SS cotter pin sets."
	Crankshaft Counter Balanced Weights Code:A6450 Price: $80.00 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
Used when converting a standard A crank to a B counter balanced style. Must be machined and balanced at your engine rebuilders.
	Safety Wire Code:A6377 Price: $0.30 Model Year: 1928 - 1931 UOM: Foot Quantity in Basket: none
".040 od. Stainless wire to secure the Torque Tube, Rear Motor Mount, Flywheel to crank and block, Transmission Rear bushing Retainer, Rear Axle Gear Case. Sold by the foot."