Generator / Alternator

	"Rebuilt Generator 28 - 30 Long Nose - 7/8"" Tapered - Outright" Code:A10000EL Price: $215.00 Quantity in Basket: none
"Restored Back to original. New field Coils, bushings, Bearings and Brushes. Armature rewound and turned. Painted and ready to install. Fully Guaranteed. Does not include Pulley or Cut-Out. WE MUST HAVE YOUR CORE FIRST"
	"Rebuilt Generator 30-31 - Short Nose - 1/2"" Tapered - Outright" Code:A10000ES Price: $215.00 Quantity in Basket: none
"Restored Back to original. New field Coils, bushings, Bearings and Brushes. Armature rewound and turned. Painted and ready to install. Fully Guaranteed. Does not include Pulley or Cut-Out. WE MUST HAVE YOUR CORE FIRST"
	Model A Ford - Mike's "A" Ford-able Parts - Power Inverter - 7.5 amp Code:A10000CHD Price: $99.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"Convert 6 volt positive ground to12 volt negative ground to power radios, CB's or other 12 Volt accessories. Works for positive ground systems only. 7.5 AMP."
	Voltage Reducer - 12 Volts to 6 Volts Code:V12873 Price: $12.75 Model Year: All years UOM: Each Quantity in Basket: none
This is a non returnable product - READ INSTRUCTIONS CAREFULLY. Designed for low amperage loads - 4 Amp maximum and 2 Amp minimum load.
	Model A Ford - Mike's "A" Ford-able Parts - Generator Field Coils - 6 Volt Code:A10000FC6 Price: $55.00 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
Made in the USA. Improve your weak generator with these good quality reproductions. 2 Pieces per Set.
	Model A Ford - Mike's "A" Ford-able Parts - Generator Field Coils - 12 Volt Code:A10000FC12 Price: $59.95 Model Year: 1928 - 1934 UOM: Set Quantity in Basket: none
Made in the USA. Improve your weak generator with these good quality reproductions. 2 Pieces per Set.
	Generator External Hardware - 1929 Code:A10011S Price: $9.25 Model Year: 1929 UOM: Set Quantity in Basket: none
This Set includes the screws for the support bracket to the generator. The cut-out & bolt for pulley. Also included is a screw and square nut for band.
	Generator External Hardware - 30-31 Code:A10012S Price: $5.60 Model Year: 1930 - 1931 UOM: Set Quantity in Basket: none
This Set includes the screws for the support bracket to the generator. The cut-out & bolt for pulley. Also included is a screw and square nut for band.
	Generator Brush Set Code:A10043 Price: $2.25 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
"Set of 3 brushes for your ""A"" Generator. Does not work on early 1928's."
	Generator Brush Holder Bushing Code:A10048 Price: $1.20 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
This Bushing fits over the stud that the brush holder pivots on and slides inside the brush holder.
	Generator Stop Pin Insulator Code:A10049 Price: $1.40 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
This Pin slides onto the smaller stud on the 3rd plate brush plate assembly.
	Generator Brush Holder Code:A10051 Price: $3.75 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
Generator Brush secures to this zinc plated holder. Need 3.
	Generator Brush Spring Code:A10057 Price: $0.95 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. This is for the right hand spring for the 3rd generator brush and ground brush. Need 2.
	Generator Rebuild Kit Code:A10020BS Price: $47.50 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
Comes complete except for armature & field coil. Instructions included.
	Generator Main Brush Spring Code:A10068 Price: $1.15 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. This is the for the Left Hand Main Spring.
	Generator Third Brush Plate Assembly Code:A10072 Price: $5.10 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
Use this rotating plate to adjust the amp output.
	Generator Third Brush Plate Retainer Code:A10075A Price: $3.25 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
This holds the Brush Plate (A10072) to the End Plate. Need 2.
	Generator Stud Clip Code:A10076 Price: $0.45 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
This little Clip secures the Brush Holder to the Pivot Stud.
	Generator Front or Pulley end Bearing Code:A10093AR Price: $6.15 Model Year: 1928 - July 1929 UOM: Each Quantity in Basket: none
For the Early '28 Powerhouse Generator - 1928 - July 1929.
	Generator Front or Pulley end Bearing Code:A10094 Price: $5.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
For the later '28 Powerhouse Generator thru the end of production. This bearing goes in the pulley end.
	Generator Rear End Plate Bearing Code:A10095AR Price: $4.50 Model Year: 1928 - 1930 UOM: Each Quantity in Basket: none
For the Late 1928-'30 Generators. This bearing goes in the rear of the Generator.
	Generator Front End Plate Bearing Screws Code:A10096 Price: $1.45 Model Year: 1929 - 1930 UOM: Set Quantity in Basket: none
Used when installing A10095AR. Set of 4 Stainless Screw Rivets and Nuts. You may need to cut the rivets a little shorter.
	Generator Bearing Spacer Code:A10097 Price: $2.25 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
This spacer fits to the front of the bearing in the Generator.
	Generator Bearing Retainer Plate Code:A10098 Price: $2.50 Model Year: 1929 - 1934 UOM: Each Quantity in Basket: none
This is riveted to the Generator Front Plate (pulley end) to hold the bearing in place.
	Generator Retaining Ring Code:A10099 Price: $1.00 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
This Ring fits to the front of the Spacer. Need 2.
	Generator Terminal Wire - 29-30 Code:A10102 Price: $2.45 Model Year: 1929 - 1930 UOM: Each Quantity in Basket: none
You'll need to solder the wire end of this wire to the head of the bolt that goes through the casing to the Cut-out.
	Generator Terminal Wire - 30-31 Code:A10102B Price: $2.45 Model Year: 1930 - 1931 UOM: Each Quantity in Basket: none
You'll need to solder the wire end of this wire to the head of the bolt that goes through the casing to the Cut-out.
	Generator Terminal Nut - Brass - 28-30 Code:A10104B Price: $2.60 Model Year: 1928 - 1930 UOM: Pair Quantity in Basket: none
"2 - 10/32"" x 7/16"" Hex Nuts and Lw's."
	Generator Terminal Nut - Copper - 1931 Code:A10104C Price: $2.90 Model Year: 1931 UOM: Pair Quantity in Basket: none
"2 - 10/32"" x 7/16"" Hex Nuts and Lw's."
	Generator Post Washer Code:A10106 Price: $1.65 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
This fits over the Bolt attached to the Terminal Wire inside the Casing.
	Generator Ground Lead Code:A10108 Price: $2.25 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
This ground lead attaches to the Generator Main Brush.
	Model A Ford - Mike's "A" Ford-able Parts - Generator Felt Retainer Only Code:A10113A Price: $1.30 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
Felt Retainer for the Generator. Order A10113B if you need the entire Bearing Retainer Component Set.
	Generator Bearing Retainer Components Code:A10113B Price: $6.80 Model Year: 1929 - 1931 UOM: Set Quantity in Basket: none
Retainer - Retainer Felt - Retainer Washer - 2 Retainer Rings- Bearing Spacer for the 1929 - 1931
	Generator Bearing Washer Code:A10114 Price: $2.10 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
Bearing Washer fits between the Felt Washer and the Bearing.
	Generator Rear End Plate Bushing Code:A10128 Price: $0.95 Model Year: 1930 - 1932 UOM: Each Quantity in Basket: none
"ID.626, OD.752, Length.965, Replaces earlier style (A10095AR) bearing. Used Apr.'30 till end. Oil soaked for good wear."
	Generator Rear End Plate Assembly Code:A10129BR Price: $25.00 Model Year: 1928 - 1930 UOM: Each Quantity in Basket: none
"Plate includes Bearing Race, 2 Brush Holder Studs, 2 Brush Holder Stop Pin Studs & Oil Cover. All holes are Drilled & Tapped. Used October 1928 - April 1930 with ball bearing end plate."
	Generator Pulley Code:A10130B Price: $26.00 Model Year: Oct. '28 till April '30 UOM: Each Quantity in Basket: none
"Cast Iron pulley for the generator. October 1928 till April 1930 - Long Nose - 7/8"""
	Generator Pulley Code:A10130A Price: $26.00 Model Year: April 1930 till End UOM: Each Quantity in Basket: none
"Cast Iron pulley for the generator. April '30 - till End - Short Nose - 1/2""."
	Generator Pulley Adapter Code:T10144R Price: $1.75 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"If you have the earlier long nose generator and cannot find the correct pulley, you can now use the more common short nose pulley with this adapter."
	Generator Commutator Oil Cup Code:A10141 Price: $1.25 Model Year: 1930 - 1931 UOM: Each Quantity in Basket: none
The 1930-'31 A's used this cadmium oil cup on the End Plate of the Generator.
	Generator Band Code:A10142OR Price: $3.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
This is a good reproduction of the original band that covers the slots for getting to the Brushes. Mounting Hardware included.
	Generator Cooler and Band Code:A10142 Price: $18.25 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Extend the life of your generator by keeping the brushes and armature from overheating.
	Generator & Starter Band Screw & Nuts Code:A10142MB Price: $0.40 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
"Round headed Screw & Square nut to hold either the Starter or Generator bands on. 10/32 x 1 1/4"" Screws."
	Generator Pulley Bolts Code:A10143A Price: $0.80 Model Year: October 1928 - April 1930 UOM: Each Quantity in Basket: none
"Thin headed bolts with lock washers. Two sizes were used, so check yours before ordering. 7/8"" Taper - October 1928 - April 1930 - 1/4""-28 x 7/16"" Bolt"
	Generator Pulley Bolts Code:A10143B Price: $0.95 Model Year: April 1930 till End UOM: Each Quantity in Basket: none
"Thin headed bolts with lock washers. Two sizes were used, so check yours before ordering. 1/2"" Taper - April 1930 till end."
	Generator Wick/Spring Code:A10145 Price: $1.90 Model Year: 1930 - 1931 UOM: Set Quantity in Basket: none
Fits on the Rear End Plate of the Generator.
	Generator Bearing Plug Code:A10149 Price: $1.35 Model Year: 1930 - 1931 UOM: Each Quantity in Basket: none
Fits on the Rear End Plate of the Generator.
	Pivot Bolt And Nut (Generator) Code:A10151 Price: $1.50 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
The bolt and nut that holds the generator on. 1/2-20 x 2 3/4 Bolt Lockwasher & Nut
	Generator and Alternator Tension Brace Code:A10152 Price: $4.75 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
Useful accessory holds the generator or alternator tight against the fan belt. Come with a new Alternator.
	Generator Cut-out Diode Code:A10155DIO Price: $3.15 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Made in the USA. This solid state diode improves the old cutout. Instructions Included.
	Generator Bearing Felt Code:A10160 Price: $1.25 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
This goes between the Bearing Washer and the Bearing Felt Retainer on the front of the Generator.
	Generator Through Bolt Code:A10166 Price: $2.10 Model Year: 1929 - 1931 UOM: Each Quantity in Basket: none
"These bolts keep the ends in place. 1/4 - 20 x 6"" Bolts and Lock washers. 2 needed per generator."
	Generator Field Insulator Code:A10193 Price: $1.00 Model Year: 1929 -1931 UOM: Each Quantity in Basket: none
This insulates the Field Coils in the Generator.
	Generator Cut-Out With Diode (Semi-Conductor type) Positive Ground - NOT REFUNDABLE Code:A10505D Price: $48.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"This semiconductor (state of the art) unit modernizes and replaces the original relay type of past years. It is identical to original exterior appearance and dimensions and is plated in cadmium as original. Also includes authentic insulators and hardware. It is designed to continuously handle the maximum 20 apmere output of the original Ford DC third brush generator. It can be used on Model ""A"" and early V-8 positive ground systems. Comes complete with all Electrical Hardware and Instructions for use."
	Generator Cut-Out Mounting Screws Code:A10505MB Price: $0.75 Model Year: 1929 - 1931 UOM: Set Quantity in Basket: none
Two screws and lock washers to attach the Cutout to the Generator. 2 x 10/32 x 5/16.
	Pole Screw For Starter Or Generator Code:A11086 Price: $0.70 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
"This screw goes through the Starter Casing to hold the steel Plates that hold the Starter Fields in place. 4 needed - 3/8""-16 x 5/8""."
	Generator Cut-Out Clip Code:A10550 Price: $0.60 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Attaches to the side of the cut out & slips over the post of the generator. NOTE: Already on new cut outs.
	Generator Cut-Out Insulators Code:A10563 Price: $3.50 Model Year: 1928 - 1931 UOM: PR Quantity in Basket: none
Special fiber washers that fit where the bolts go through the cap on original cut outs. The thin one goes with A10550 connector - the thicker one has a special square to fit into the square hole in the cutout.
	Generator Cut-Out Screws Code:A10564 Price: $1.00 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
Two 10-32 x 1/2 in. thick headed hex screws w/ lock washers that go thru original cut out terminals.
	Mike's Ultimate Alternator - 70 Amp - 6 Volt Code:A150-6P Price: $189.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
6 Volt Unit - used on all Models A's using Halogen lights, etc. All new Alternator - not rebuilt. This bolt on, one wire unit with custom offset mounting bracket and two inch diameter pulley will provide perfect belt alignment and higher output at lower RPM's. Bracket and Pulley A10001C is included. Sorry - no extra discounts.
	Mike's Ultimate Alternator - 70 Amp - 12 Volt Code:A100-12N Price: $175.00 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
12 Volt Unit - used on all Models A's for most purposes. All new Alternator - not rebuilt. This bolt on, one wire unit with custom offset mounting bracket and two inch diameter pulley will provide perfect belt alignment and higher output at lower RPM's. Bracket and Pulley A10001C is included. Sorry - no extra discounts.
	Alternator Bracket & Pulley Code:A10001C Price: $44.95 Quantity in Basket: none
A new Ofset Bracket and Pulley to go with the Alternators A100-12N / 12 volt and A150-6P 6 Volt.
	Alternator Pulley Code:A10131A Price: $32.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
High output pulley has a smaller diameter than Standard. Fits any alternator with a .670 shaft size. This gives a 20% faster R.P.M. which allows a charging rate at a lower engine R.P.M.
	Pivot Bolt And Nut (Alternator) Code:A10151B Price: $1.50 Model Year: 1928 - 1931 UOM: Set Quantity in Basket: none
Longer bolt than A10151 to compensate for the thicker brackets required to support alternator.
	AMP Meter - 20-20. Code:A10850B Price: $8.25 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Original Style Amp Meter. Order a 30-30 if you have a high output generator or are running on a 12 Volt system. Nuts A10850N included.
	AMP Meter - 20-20 - Ford Script Code:A10850BF Price: $9.50 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Original Style Amp Meter. Order a 30-30 if you have a high output generator or are running on a 12 Volt system. Nuts A10850N included. Ford Script.
	AMP Meter - 30-30 Code:A10850C Price: $8.25 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Original Style Amp Meter. This is the AMP meter to use if you have a high output generator or are running on a 12 volt system. Nuts included.
	AMP Meter - 30-30 - Ford Script Code:A10850CF Price: $9.75 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Original Style Amp Meter. This is the AMP meter to use if you have a high output generator or are running on a 12 Volt system. Ford Script
	Amp Meter Nut Code:A10850N Price: $1.50 Model Year: 1928 - 1931 UOM: Pair Quantity in Basket: none
Insulated nut to attach wires to the amp meter. Included with AMP Meter. 2 Used on amp meter and one used on original pop-outs.
	AMP Ford Script Plate Code:A10850P Price: $1.95 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Face plate will fit on either the original or reproduction amp meters. Ford Script was not original.
	Amp Meter Ring Code:A10864 Price: $3.25 Model Year: 1928 - 1931 UOM: Each Quantity in Basket: none
Chrome plated trim ring for the AMP Meter - Included with AMP Meter