|
 |
"Intake Manifold, Drilled - 1928 - 1931" Code:A9425D Price:
$85.00
Model Year: March 1929 - End
UOM: Each
Quantity in Basket: none
|
| "This excellent quality manifold can be used on all A's. Drilled and tapped, has the plug. |
|
|
|
 |
Intake To Exhaust Bolts Code:A9425MB Price:
$1.00
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| 2 x 5/16 inch - 18 x 3/4 inch Bolt & l.w. to attach the intake to the exhaust manifold. |
|
|
|
 |
Exhaust Manifold Code:A9430 Price:
$91.50
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Replace leaking or warped manifold with this good one. Torque to 55/55 lbs. |
|
|
|
 |
Cast Iron Header Code:A9430H Price:
$250.00
UOM: Each
Quantity in Basket: none
|
| This header is designed to be used with the weber down draft carburetor (A9510DOW) - it gave our speedster an extra 10 m.p.h. |
|
|
|
 |
Engine Paint - Spray Code:M200 Price:
$5.95
Model Year: 1928 - 1931
UOM: CAN
Quantity in Basket: none
|
| Need one spray can of this model A Ford green paint if you are touching up your engine. Two cans are needed if you are repainting. 11 Oz. Can. |
|
|
|
 |
Heat Resistant Spray Paint - Black Code:A5240 Price:
$9.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "Resists up to 1500 degrees for manifolds and mufflers - Spray on clean metal, no primer needed. Black. 11 Oz. Can." |
|
|
|
 |
Heat Resistant Spray Paint - Aluminum Code:A5241 Price:
$9.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Resists up to 1200 degrees for manifolds and mufflers - Spray on clean metal, no primer needed. Hi-Heat Aluminum. 12 Oz. Can. |
|
|
|
 |
Manifold Nuts Code:A9430N Price:
$3.95
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| 4 x 7/16 -20 Brass nuts to attach the manifold. Torque to 50ft/lbs. |
|
|
|
 |
Manifold Studs Code:A9431 Price:
$3.25
Model Year: 1928 - 1934
UOM: Set
Quantity in Basket: none
|
| Set of 4 studs to screw into block to attach the manifold. |
|
|
|
 |
Manifold Stud Washers Code:A9443 Price:
$4.50
Model Year: 1928 - 1934
UOM: Set
Quantity in Basket: none
|
| Extra heavy duty washers help hold intake and exhaust manifolds in place. The crown of the washer goes away from the motor. |
|
|
|
 |
Gland Rings Code:A9440 Price:
$2.50
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| Fit into the manifold to form a tight seal. Use if using regular gaskets. For NEW Exhaust only. |
|
|
|
 |
Manifold Gasket Code:A9433F Price:
$4.70
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| One-piece asbestos substitute with steel covering gasket. |
|
|
|
 |
Manifold Gasket - 2 Piece Code:A9433 Price:
$2.75
Model Year: 1928 - 1934
UOM: Pair
Quantity in Basket: none
|
| Two-piece flat asbestos substitute gasket |
|
|
|
 |
Copper Manifold Gaskets - Jan. '29 - May '31 Code:A9433C Price:
$11.30
Model Year: January 1929 - May 1931
UOM: Pair
Quantity in Basket: none
|
| For the show car. 2-piece gaskets are copper with asbestos substitute in the middle. |
|
|
|
 |
Copper Manifold Gaskets - May 31 till end Code:A9433C2 Price:
$11.30
Model Year: May 1931 - End
UOM: Pair
Quantity in Basket: none
|
| For the show car. 2-piece gaskets are copper with asbestos substitute in the middle. Late '31. |
|
|
|
 |
"Carb Gasket, Paper" Code:A9447 Price:
$0.25
Model Year: 1928 - 1934
UOM: Each
Quantity in Basket: none
|
| Fits between carburetor and intake manifold. |
|
|
|
 |
"Carb Gasket, Copper" Code:A9447C Price:
$3.10
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Fits between carburetor and intake manifold. |
|
|
|
 |
Waffle Style Manifold Heater Code:A18478WS Price:
$79.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "This heater has two mounting holes that are 7 1/16"" apart from center of holes. Heater door valve is not included - Order A18479S." |
|
|
|
 |
Manifold Heater Code:A18478S Price:
$78.50
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| "Takes the chill off of a morning. Bolts onto the manifold, with no cutting or welding, has a firewall valve to control heat. The valve A18479S is included." |
|
|
|
 |
Manifold Heater Valve Door Code:A18479S Price:
$10.50
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| Replacement firewall valve only. Mounts directly on firewall to let you control the heat. Needs a 2 inch hole cut into the firewall. This is included with A18478S. |
|
|
|
 |
Heater Door Patch Panel Code:A18478P Price:
$12.95
Model Year: 1930 - May 1931
UOM: Each
Quantity in Basket: none
|
| "Made in the USA. a 4 1/2"" x 8"" patch panel to fill the area where the heater hole was usually cut. Original gauge steel, with the exact contour reinforced ribs. " |
|
|
|
 |
Heater - 6 Volt Code:A18480-6 Price:
$215.00
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "Do You get cold when you drive your car in the winter? Now there is a solution to keep you warm, so you can drive year round. This universal aftermarket heater, uses the coolant system for its heat. Instructions included. You will need the Heater Hook Up Kit - A8274 for installation. Also see A8275ACC." |
|
|
|
 |
Heater - 12 Volt Code:A18480-12 Price:
$146.00
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "Do You get cold when you drive your car in the winter? Now there is a solution to keep you warm, so you can drive year round. This universal aftermarket heater, uses the coolant system for its heat. Instructions included. You will need the Heater Hook Up Kit - A8274 for installation. Also see A8275ACC." |
|
|
|
 |
Heater Hose & Fittings Set Code:A18480K Price:
$27.00
Model Year: 1929 - 1931
UOM: Set
Quantity in Basket: none
|
| When installing the A18480-6 or 12 heater, you will need to install this kit. Kit includes 8' of 3/4" ID hose, an elbow shut off valve that has a 3/8" pipe thread on one side, and a 3/4" hose barb on the other, a 3/8" to 1/2" OD pipe adapter and 4 hose clamps. See A8274 for Heater Hook-up Kit. |
|
|
|
 |
Heater Hook-Up Kit Code:A8274 Price:
$51.00
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Made in the USA. Make your life a little simpler with the easy installation of a hot water heater in your Model "A". Replace your lower water pipe with the long pipe. Has a nipple for the original petcock as well as a nipple for the return hose with the fitting. The shorter pipe splices into your upper radiator hose and has a nipple for the temperature gauge as well as the water pickup connection. Pipes are all powder coated black and include clamps for the upper pipe. Upper fitting has a special scooped inlet to force water into the heater. |
|
|
|
 |
Water Inlet Code:A8275ACC Price:
$59.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Made in the USA. Use this cast aluminum with an extra boss for heater hookup. Comes with plug and bolt for wire clip. Use this Inlet with the 6 or 12 Volt Heater (A18480-6 or A18480-12) and the Heater Hook up Kit (A8274). |
|
|