|
 |
Steering Stabilizer Code:A3281STAB Price:
$99.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Complete with brackets and Instructions. Design may change depending on supplier. |
|
|
|
 |
Tie Rod Code:A3281 Price:
$17.50
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "This tie rod has left hand threads on one end and right hand threads on the other. Solid steel - replace if drag link has worn a low spot on your old one. Threads are 11/16-24. Please note: Shipped in a PVC Tube for protection. 44"" Long. Additional shipping charge will apply." |
|
|
|
 |
Tie Rod Bolts - A3285/86MB Code:A328586MB Price:
$5.95
Model Year: 1928 - 1931
UOM: Set / 4
Quantity in Basket: none
|
| Holds tie rod to tie rod end. 4 piece Set. The nut faces down - the bolt is on the rear side of the tie rod. Washers not Included. Cotter Pins not incluced - order #37 or #37SS. |
|
|
|
 |
"Tie Rod End, Right" Code:A3285 Price:
$15.75
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| No internal parts - bolts and nuts are included. Not the best reproduction parts - use original if possible. Tie rod ends used threaded grease fittings until Sept. '30 and the fitting faced forward. Thereafter the fittings changed to a press in style and faced towards the rear. |
|
|
|
 |
"Tie Rod End, Left" Code:A3286 Price:
$15.75
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| No internal parts - bolts and nuts are included. Not the best reproduction parts - use original if possible. Tie rod ends used threaded grease fittings until Sept. '30 and the fitting faced forward. Thereafter the fittings changed to a press in style a |
|
|
|
 |
Tie Rod/Drag Link End Plug Tool Code:T3305T Price:
$5.00
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "You can remove the threaded end plugs on the tie rod and drag link ends with this tool. Use 7/8"" wrench." |
|
|
|
 |
Drag Link Code:A3305 Price:
$64.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Runs from pitman arm to front end. Innards to rebuild are A3305S or A3305SE (longer life). The ball location is different on each end of the drag link rod. Before Oct. '28 the hole is closest to the end for the pitman arm. In Oct. '28 this was reversed - the pitman arm ball enters closer to the center of the rod. |
|
|
|
 |
Bronze Impregnated Teflon Easy Steer Kit Code:A3305M Price:
$44.95
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| This kit replaces the A3305SE. This bronze impregnated Teflon is a new Space Age material that will not wear. The manufacturer has over 12,000 miles on his Model A with no sign of wear. Far superior than the white teflon kits. Includes Instructions. |
|
|
|
 |
Bronze Impreganted Teflon Seats Code:A3305BRZ Price:
$36.00
Model Year: 1928 - 1931
UOM: Set / 8
Quantity in Basket: none
|
| Replace your worn white teflon seats with these new spage age bronze impregnated seat. A far superior quality product. This replaces our Part # A3305TEF. |
|
|
|
 |
Tie Rod/Drag Link Rebuild Kit Code:A3305S Price:
$11.50
Model Year: 1928 - 1931
UOM: Kit
Quantity in Basket: none
|
| Set includes all parts needed in ends of tie rod and drag link. 2 Sets needed per car. |
|
|
|
 |
Tie Rod And Drag Link Seal Code:A3332 Price:
$3.00
Model Year: 1928 - 1934
UOM: Set
Quantity in Basket: none
|
| This rubber seal keeps grease in and dirt out. 4 in a Set. |
|
|
|
 |
Tie Rod and Drag Link Metal Cap Code:A3333 Price:
$2.75
Model Year: 1928 - 1934
UOM: Set
Quantity in Basket: none
|
| This cap holds the rubber seal in place around the steering balls. |
|
|
|
 |
Radius Rod Ball Felt Code:A3425 Price:
$0.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Heavy felt pad fits inside bell housing over the radius ball. |
|
|
|
 |
Radius Bushings Code:A3435 Price:
$1.35
Model Year: 1928 - 1931
UOM: Pair
Quantity in Basket: none
|
| "For the original style radius, these bushings slide over the bolts as spacers." |
|
|
|
 |
Rod Socket Replacement Set Code:A3440RE Price:
$7.50
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| "A complete radius ball cap assembly. Cast iron. Includes ball, nuts, lock washers, bolts, socket cap and plate." |
|
|
|
 |
Radius Ball Socket Bolts Code:A3440A Price:
$2.95
Model Year: 1928 - 1931
UOM: Pair
Quantity in Basket: none
|
| Slotted head on these special bolts take a retaining pin to hold them in place. |
|
|
|
 |
Radius Rod Nuts Code:A3440N Price:
$2.50
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Slotted nuts hold radius rod cap in place. 7/16 inch - 20. Need 2. |
|
|
|
 |
Radius Ball Code:A3446 Price:
$1.60
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Oil-resistant rubber ball goes over the steel radius ball. Made for A3440RE. |
|
|
|
 |
Radius Ball Kit Code:A3440S Price:
$21.75
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| "Stamped steel as original. Original style radius cap assembly. If ball is worn, cup a large fender washer to take up play." |
|
|
|
 |
Front Radius Rod Ball Spacer Washer Code:A3405W Price:
$1.75
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "This spacer washer is to be used to take up wear on the front radius rod ball. Use one or two washers as needed with the original style stamped steel rod ball socket, NOT the cast iron after market set with the rubber ball. Apply a little grease before installation." |
|
|
|
 |
Radius Cap Springs Code:A3445 Price:
$1.25
Model Year: 1928 - 1931
UOM: Pair
Quantity in Basket: none
|
| For A3440S - original style steering. |
|
|
|
 |
Radius Ball Kit Retainer Pin Code:A3441 Price:
$0.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| For A3440A. |
|
|
|
 |
Replacement Radius Ball Repair Kit Code:A3440REP Price:
$59.95
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| Most people do not realize how extremely important the radius ball assembly is to the Model A. If it is not in good condition, it will cause all sorts of problems with your front end. We have come up with a replacement which includes a grease fitting. The original ball has to be cut away from the radius arm / wish bone and a new hole drilled and welded into place. The set includes complete housing A3440S and ball. |
|
|