|
 |
Starter Mount Set Code:A11002MB Price:
$2.00
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| "3 x 3/8 -16 x 1"" Set of Bolts & Lock Washers to mount the Starter." |
|
|
|
 |
Starter Rebuild Kit Code:A11025S Price:
$49.50
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| Complete with all brushes, springs, etc. that you will need. Instruction Included. |
|
|
|
 |
Starter Armature Thrust Washer Code:A11036 Price:
$0.40
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "Fiber washer that fits onto the Front End of the Shaft, next to the commutator." |
|
|
|
 |
Starter Front End Bushing Code:A11052 Price:
$1.45
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "This bushing fits on the starter drive end, brush, end. ID .640, OD .753 - Length .592. 3/4"" OD." |
|
|
|
 |
Starter Brush Set Code:A11054S Price:
$4.60
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| 2 Insulated Brushes and 2 Ground Wires. |
|
|
|
 |
Starter Brush Spring Code:A11059 Price:
$0.50
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Keeps brush away over the armature. 4 needed. |
|
|
|
 |
Starter Brush Holder Code:A11061 Price:
$0.80
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Holds Spring and Brush in place. 4 needed. |
|
|
|
 |
Starter Brush Holder Insulator Code:A11062 Price:
$1.85
Model Year: 1928 - 1931
UOM: Pair
Quantity in Basket: none
|
| Insulates the Brush from the End Plate. |
|
|
|
 |
Starter Brush Holder Rivets Code:A11063 Price:
$3.60
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| "16 Piece Set - 4 short rivets for ground brush holder, 4 long rivets, 4 fiber insulating spacers & 4 fiber insulators for under rivet head." |
|
|
|
 |
Starter Rivet Insulating Washer Code:A11072 Price:
$0.35
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| 4 needed between the Brush Holder and the Brush Holder Insulator. |
|
|
|
 |
Starter Brush Holder Rivet Insulator Code:A11073 Price:
$0.30
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Bakelite Insulators used between the Rivets and the Brush Holder Insulator. |
|
|
|
 |
Starter Field Coils - 6 Volts - A11082/85 Code:A11082-85 Price:
$56.00
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Set of two high quality Starter Field units. 100% Copper Wire and fabric wrapped for insulation. |
|
|
|
 |
Starter Field Coils - 12 Volt - A11082/8512 Code:A11082-8512 Price:
$57.85
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Set of two high quality Starter Field Coils. 100% Copper Wire and fabric wrapped for insulation. |
|
|
|
 |
Pole Screw For Starter Or Generator Code:A11086 Price:
$0.70
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "This screw goes through the Starter Casing to hold the steel Plates that hold the Starter Fields in place. 4 needed - 3/8""-16 x 5/8""." |
|
|
|
 |
Starter Field Coil Insulator Code:A11087 Price:
$1.60
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| This insulation wraps around the Field Coils to prevent shorts. |
|
|
|
 |
Starter End To End Bolt Code:A11091 Price:
$2.10
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "2 x 1/4"" -20 x 6 3/4"" Bolts with Lock Washer & Nut. Need 2 Bolts - They go from end to end to hold the starter together." |
|
|
|
 |
Starter Contact Button Code:A11102 Price:
$6.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "This is the contact button at the top of the starter that the starter switch makes connection with. A11106, A11107 & A11108 should also be purchased." |
|
|
|
 |
Starter Field Terminal Insulator Code:A11106 Price:
$0.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| The contact button sits on this insulator on the outside of the starter - Need 2. |
|
|
|
 |
Starter Field Terminal Bushing Code:A11107 Price:
$1.25
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Contact button sits inside this bushing through the starter casing. |
|
|
|
 |
Starter Field Insulator Code:A11108 Price:
$0.75
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Sits on starter casing where contact button enters. |
|
|
|
 |
Starter Band Code:A11125 Price:
$3.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| 1 x 10/32 x 1 1/4 screw & sq. nut. Reproduction covers the slots for adjusting the brushes. Includes A11125MB. |
|
|
|
 |
Starter & Generator Band Screws Code:A11125MB Price:
$0.45
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| Spare screws & Nuts for your A11125 Starter Band. 1 x 10-32 x 1 1/4 Screw and Square Nut. |
|
|
|
 |
Starter Shim (Paper Gasket) Code:A11130SH Price:
$0.45
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Used between the Starter and the Bell housing to adjust the gear meshing. |
|
|
|
 |
Starter Rear Armature Washer Code:A11132 Price:
$0.50
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Fits at the rear of the Armature as a Thrust Washer. |
|
|
|
 |
Starter End Plate Bushing - .688 OD - .627 ID Code:A11135A Price:
$2.75
Model Year: 1928 - 1929
UOM: Each
Quantity in Basket: none
|
| "This bushing goes on the rear end plate of the Starter, opposite of the Brush end. 1.155"" Wide." |
|
|
|
 |
Starter End Plate Bushing - .753 OD - .627 ID Code:A11135B Price:
$1.95
Model Year: 1929 - 1931
UOM: Each
Quantity in Basket: none
|
| "This bushing goes on the rear end plate of the Starter, opposite of the Brush end. 1.155"" Wide." |
|
|
|
 |
Bendix - Starter Drive Code:A11350 Price:
$19.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| This is a complete starter drive. Don't forget to order the A11384 Key. Sorry - no extra discounts. |
|
|
|
 |
Bendix Shaft #6 Woodruff Key Code:A11384 Price:
$0.40
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Bendix Key for the Starter Drive A11350. |
|
|
|
 |
Bendix - Starter Drive Spring Code:A11375 Price:
$6.50
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| "These are the later 3/8"" bolt eyelet. Early 5/16"" no longer available." |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Modern Bendix Drive Code:A11350M Price:
$19.95
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| This modern style starter device is more reliable, and perfect for 6 or 12 Volt applications. Sorry - no extra discounts. |
|
|
|
 |
Modern Bendix Drive Installation Tool - Model A Ford - Mike's "A" Ford-able Parts Code:T11350 Price:
$17.50
Model Year: All
UOM: Each
Quantity in Basket: none
|
| A handy unit to help with the installation of the modern drive. Instructions Included. |
|
|
|
 |
Starter Drive Bolts/Washers Code:A11382S Price:
$3.35
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| "2 x 3/8"" -24 Bolts & Tab Washers. Thin headed Bolts with Special washers holds drive shaft & spring. Ford used two sizes so make sure to measure yours." |
|
|
|
 |
Starter Drive Bolts/Washers Code:A11382SE Price:
$3.35
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| "2 x 5/16""h -24 Bolts & Tab Washers. Thin headed Bolts with special washers holds drive shaft & spring. Ford used two sizes so measure carefully." |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Starter Bendix Spring Bolt Washer Code:A11379A Price:
$0.50
Model Year: 1928 - 1931
UOM: Pair
Quantity in Basket: none
|
| "2 x 5/16"" Tabbed Washers." |
|
|
|
 |
Starter Bendix Spring Bolt Washers Code:A11379B Price:
$0.80
Model Year: 1928 - 1931
UOM: Pair
Quantity in Basket: none
|
| "2 x 3/8"" Tabbed Washers." |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Starter Drive Spring Clips Code:A11383 Price:
$4.95
Model Year: 1928 - 1931
UOM: Pair
Quantity in Basket: none
|
| Made and heat treated to original Ford specs. These are designed to stabilize the starter spring and help prevent bending and breaking of the starter spring screws. These are only made to use with the 5/16 size bolts, as explained in the Ford Service Bulletins. |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Starter Switch Code:A11450 Price:
$19.00
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Cadmium plated exact reproduction of the Ford original with copper terminal nuts. |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Starter Switch Gasket Code:A11450G Price:
$0.85
Model Year: 1928 - Early 1930
UOM: Each
Quantity in Basket: none
|
| This gasket fits between the starter switch and the starter. 1928 - Early 1930 |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Starter Switch Bolts Code:A11450MB Price:
$0.75
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| "4 x 10/32"" x 5/16"" screws & lock washers to attach the starter switch." |
|
|
|
 |
Starter Switch Nut - Copper - 1928 - 1930 Code:A11451N Price:
$1.95
Model Year: 1928 - 1930
UOM: Each
Quantity in Basket: none
|
| "2 x 3/8"" -16 x 5/8"" wide thin copper nut for the Starter Switch Terminal. Included 2 nuts and one star washer." |
|
|
|
 |
Stater Switch Nut - Brass - Late 1930 - 1931 Code:A11451NB Price:
$1.60
Model Year: Late 1930 - 1931
UOM: Set
Quantity in Basket: none
|
| "2 x 3/8"" -16 x 5/8"" wide thin brass nut for the Starter Switch Terminal. Included 2 nuts and one star washer." |
|
|
|
 |
Starter Switch Nut - Steel - Feb. 1931 - End Code:A11451NS Price:
$1.55
Model Year: February 1931 - End
UOM: Set
Quantity in Basket: none
|
| "2 x 3/8"" -16 x 5/8"" wide thin steel nut for the Starter Switch Terminal. Included 2 nuts and one star washer." |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Safety Fuse Mount Set Code:A11450SFMB Price:
$0.50
Model Year: 1928 - 1934
UOM: Set
Quantity in Basket: none
|
| "2 x 10/32"" x 7/8"" Screws & Lock Washers. If you've added a safety fuse, you'll need 2 of these longer screws with lock washers." |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Fuses - 30 Amps Code:A11450FU Price:
$1.50
Model Year: 1928 - 1934
UOM: Set
Quantity in Basket: none
|
| For your safety fuse unit. Keep an extra on hand. Sold in 5's. |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Safety Fuse Code:A11450SF Price:
$9.75
Model Year: 1928 - 1934
UOM: Each
Quantity in Basket: none
|
| Safety accessory fits easily on starter switch using the same holes. Provides 30 amp protection. Order the A11450SFMB Screws. Comes with spare fuse. Order A11450FU for extra Fuses. |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Sparky Start Code:A11460 Price:
$48.00
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| "Made in the USA. This handy gadget attaches to your starter using the same mounting holes as your starter switch. When you retard your spark lever on the steering column, it automatically engages the starter switch to start the car. The starter button on the floor is still usable." |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Hand Starter Code:A11470F Price:
$79.95
Model Year: 1928 - 1931
UOM: Set
Quantity in Basket: none
|
| This accessory mounts to your steering column and allows you to apply the starter button with a rod. You can still use your foot activated rod with this unit. |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Starter Rod Code:A11470 Price:
$2.75
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| Cadmium Plated Rod that screws into the Starter Switch. Order A11471P Cover. |
|
|
|
 |
Model A Ford - Mike's "A" Ford-able Parts - Starter Rod Cover Code:A11471P Price:
$1.10
Model Year: 1928 - 1931
UOM: Each
Quantity in Basket: none
|
| This pad fits over the flat head of starter rod so your foot won't slip off. Not originally used. |
|
|
|
 |
Starter Rod Grommet Code:A11480AR Price:
$4.80
Model Year: 1928 - August 1930
UOM: Each
Quantity in Basket: none
|
| "This original style grommet is made from hard rubber, has a resemblance to the original bakelite. No metal cover is used with this. Used from 1928 - August 1930." |
|
|
|
 |
Starter Rod Grommet - 28-30 Code:A11480 Price:
$0.95
Model Year: 1928 - 1930
UOM: Each
Quantity in Basket: none
|
| Fits on firewall and will have a D-nut on Each side of the rod hole. Used through 8/30. |
|
|
|
 |
Starter Rod Grommet Cover Code:A11481 Price:
$1.65
Model Year: 1928 - 1930
UOM: Each
Quantity in Basket: none
|
| Fits on firewall and will have a D-nut on Each side of the rod hole. Used through 8/30. |
|
|
|
 |
Starter Rod Grommet - 30-31 Code:A11480A Price:
$0.70
Model Year: 1930 - 1931
UOM: Each
Quantity in Basket: none
|
| Replaced A11480 in 9/30 through end of production. It used 3 rivets to mount. Rivets not included - order the A11481BMB. |
|
|
|
 |
Starter Rod Grommet Cover Code:A11481B Price:
$3.50
Model Year: 1930 - 1931
UOM: Each
Quantity in Basket: none
|
| Replaced A11481 in 9/30 through end of production. It used 3 rivets to mount. - Rivets not included - order A11481BMB. |
|
|
|
 |
Starter Rod Grommet Code:A11480C Price:
$1.10
Model Year: 1930
UOM: Each
Quantity in Basket: none
|
| Used for 6 mos. in 1930. For firewalls that have a single hole about 7/8 inch diameter. No cover was used. |
|
|
|
 |
Starter Rod Cover Mount Screws Code:A11481MB Price:
$0.50
Model Year: 1928 - 1930
UOM: Set
Quantity in Basket: none
|
| "Pair of machine screws with lock washers to attach the starter rod cover (A11480/81). 2 x 12/24 x 1/2"" Screws and Lockwashers." |
|
|
|
 |
Starter Rod Cover Mount Rivets Code:A11481BMB Price:
$0.60
Model Year: 1930 - 1931
UOM: Set
Quantity in Basket: none
|
| "3 x 9/64"" x 1/4"" oval head. 3 Tubular rivets used to attach later starter rod cover A11481B. Paint Firewall Color. Use Rivet tool RA2022." |
|
|